Recycling Industry Steel Closed Die Forging Parts

With regards to Recycling Industry Steel Closed Die Forging Parts, which require maximum hardness and strength, have critical performance specifications, can benefit from oriented grain flow, or must form bars of special dimensions that are difficult to process, forging is the best method of choice. Forging uses a hammer or press to work heated metal into a desired shape. This process breaks down the coarse granular structure of the metal into finer particles, which in turn become more suitable for the shape of your part. The result is higher density and structural integrity of metal components, higher durability and directional strength.

Product Parameter (Specification)

Maple’s Services for Recycling Industry

The Recycling Industry Steel Forging Parts has to meet increasingly stringent requirements, and requirements for specific shapes and geometrics are becoming more common. To achieve these high standards, you need steel melting and forging skills. Our team of experts stay on top of trends to ensure the right solutions are available and take full advantage of innovation and new developments

Supporting Service for Recycling Industry parts

◉ As mentioned above, in order to work in adverse conditions, the performance of the Recycling Industry Steel Closed Die Forging Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Agricultural Machinery

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Recycling Industry Steel Closed Die Forging Parts  :

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for the Recycling Industry

We have manufactured a wide range of Recycling Industry Steel Closed Die Forging Parts. The following are typical products:Valve joint, Ball valve body, Gate valve body, Choke valve body, Beer valve body,Purification water brass,Hybrid valve, ....

Why Closed Die Forging

Compared with casting, forging has its special advantages:

1. In the case of the same material, the mechanical properties of forgings are better than those of castings.

2. The forgings strength is higher and the fatigue resistance is stronger.

3. The forgings has better compactness.

4. There are no internal defects and surface defects.

5. Fast production speed, high efficiency, suitable for mass production of products.

6. The product quality is stable.