Mining Industry Stainless Steel Forging Parts

Maple machinery offers many different grades of stainless steel products. Due to corrosion and heat resistance, stainless steel has aesthetic appeal and low life cycle cost, is fully recyclable and has a good strength-to-weight ratio. Mining Industry also has a high demand for stainless steel forging products. We have extensive experience in the Mining Industry Stainless Steel Forging Parts.

Product Parameter (Specification)

Maple’s Service for Mining Industry

Maple machinery adheres to the principle of "quality first, service first, continuous improvement, continuous innovation" to serve customers in the Mining Industry. To complete our service, we offer the best quality Mining Industry Stainless Steel Forging Parts at reasonable prices. We sincerely hope to establish long-term friendly business relations with customers all over the world. We always respond promptly to customer inquiries and do our best to meet customer requirements.

Maple Machinery has been offering professional closed die forging services to our customers for many years now. They rely on us completely because of our professional services and excellent technology and advanced equipment. We can also improve the original forgings, and customers provide process solutions and purchase blanks. It is because of our high-end expertise and in-depth cooperation; we have exported millions of US dollars’ worth of forgings.

Supporting Service for Mining Components

◉ As mentioned above, in order to work in adverse conditions, the performance of the Mining Industry Stainless Steel Forging Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Mining Industry

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Mining Industry Stainless Steel Forging Parts:

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for The Mining Industry

We have manufactured a wide range of Mining Industry Stainless Steel Forging Parts. The following are typical products:Grate Bar, Burner, Dump Block, Y-Links, Spreader bar, Sockets, Roller lever, Bushing, Pallet, Crusher components, Hammer, Bucket teeth, Sleeves, Impeller, Gear cases, Chain Links, Adapters, Shackle.

Why Closed Die Forging

Compared with casting, forging has its special advantages:

1. In the case of the same material, the mechanical properties of forgings are better than those of castings.

2. The forgings strength is higher and the fatigue resistance is stronger.

3. The forgings has better compactness.

4. There are no internal defects and surface defects.

5. Fast production speed, high efficiency, suitable for mass production of products.

6. The product quality is stable.