Heavy Industry Ductile Iron Casting Parts

Maple machinery has used its infrastructure and expertise in the production of cast Iron and steel Parts to develop the production of Heavy Industry Ductile Iron Casting Parts. Fully automated manufacturing processes, the use of high-quality raw materials and skilled labor, and strict quality control ensure that the company is able to mass-produce these items without compromising the high standards of quality required for this part.The company has its own fully equipped laboratory to test all batches to ensure compliance with international quality standards.

Product Parameter (Specification)

Maple’s Service for Heavy Industry

Maple machinery is flexible in making castings using different processes such as Heavy Industry Ductile Iron Casting Parts. It produces everything from machine parts to medium parts, serving all market segments in the foundry field. Maple machinery is constantly innovating its product portfolio. In addition to the complete product line in the solution, the company can also meet the needs of the project in a timely manner..

Supporting Service for Heavy Industry

◉ As mentioned above, in order to work in adverse conditions, the performance of the Heavy Industry Ductile Iron Casting Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Mining Industry

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Heavy Industry Ductile Iron Casting Parts:

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for The Heavy Industry

We have manufactured a wide range of Heavy Industry Ductile Iron Casting Parts The following are typical products:Wire rope grip, Door handle, beam clamp for construction, spider bracket, Car parts, Sockets, Roller lever, Bushing, Pallet, Crusher components, Hammer, Bucket teeth, Sleeves, Impeller, Gear cases, Chain Links, Adapters, Shackle.

Why Sand Casting

Sand casting is an ancient casting process where the metal parts are molded by pouring metal into a hollow cavity. The mold-based manufacturing process is used to make castings with materials of iron, steel, and Aluminum. Casting-based manufacturing includes several steps and can create a wide range of shapes and sizes for metal products. The process begins with the making of a mold pattern and a gate system with the exact size and shape of the required part. The temperature required depends on the metal as some metals take a long time to heat and melt.

Maple Machinery has continuously upgraded its Sand-casting equipment and refined the casting process. The aim behind this is to use only the advanced casting technology for its Sand-casting operations. Each step follows the customer’s drawings and instructions to deliver precise solutions.