Food Process Machine Ductile Iron Casting Parts

Can any sand mold be used for sand casting? The answer is definitely no. There are several specific types of sand that can be used in this process. Various types of sand are used for casting prospects.Food Process Machine Ductile Iron Casting Parts a perfect sand mold should be able to withstand mechanical pressure while being porous enough to allow gas and steam to escape during the sand casting process. Sand mining should also be added to the perfect liquidity level for your application. Its moisture content should be chosen correctly. Sand with very low moisture content can cause molds to break..

Product Parameter (Specification)

Maple’s Service for Food Process Machine

Maple machinery is a supplier of cast and ductile iron castings as well as cored and coreless products. We provide a full range of Food Process Machine Ductile Iron Casting Parts services - we prepare technical construction records, carry out modeling, casting, machining, painting, finish and provide delivery for our production lines that have both vertical and horizontal machining. We guarantee rapid product implementation and the highest quality and size repeatability. We systematically invest in innovative technologies to increase production offers and better adapt to customer needs..

Supporting Service for Food Process Machine

◉ As mentioned above, in order to work in adverse conditions, the performance of the Food Process Machine Ductile Iron Casting Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Mining Industry

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Food Process Machine Ductile Iron Casting Parts:

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for The Food Process Machine

We have manufactured a wide range of Food Process Machine Ductile Iron Casting Parts. The following are typical products:Valve joint, Ball valve body, Gate valve body, Choke valve body, Beer valve body,Purification water brass,Hybrid valve, ....

Why Sand Casting

Sand casting is an ancient casting process where the metal parts are molded by pouring metal into a hollow cavity. The mold-based manufacturing process is used to make castings with materials of iron, steel, and Aluminum. Casting-based manufacturing includes several steps and can create a wide range of shapes and sizes for metal products. The process begins with the making of a mold pattern and a gate system with the exact size and shape of the required part. The temperature required depends on the metal as some metals take a long time to heat and melt.

Maple Machinery has continuously upgraded its Sand-casting equipment and refined the casting process. The aim behind this is to use only the advanced casting technology for its Sand-casting operations. Each step follows the customer’s drawings and instructions to deliver precise solutions.