Civil Engineering Steel Forging Parts

Forges have been used in Civil Engineering. In particular, those parts that transmit force and motion and require a high degree of safety are best made of forgings. For Civil Engineering, our portfolio of Civil Engineering Steel Forging Parts includes a variety of special stainless steels, such as martensite and biphase steels, which have been developed specifically for this purpose. We will find the best solution for your application from within our range of forged stainless steel supplies.

Product Parameter (Specification)

Maple’s Services for Civil Engineering

Maple machinery can manufacture complex Civil Engineering Steel Forging Parts completely automatically through the connection of various production processes. The combination of handling, processing, cleaning and assembly into packaging enables efficient component production. High production efficiency, always ready to serve customers

Supporting Service for Civil Engineering parts

◉ As mentioned above, in order to work in adverse conditions, the performance of the Civil Engineering Steel Forging Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Agricultural Machinery

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Civil Engineering Steel Forging Parts :

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for the Civil Engineering

We have manufactured a wide range of Civil Engineering Steel Forging Parts. The following are typical products:Ground engaging tools: drill bits, carbide tipped tool, forged bucket tooth, auger.....

 Why Closed Die Forging

Compared with casting, forging has its special advantages:

1. In the case of the same material, the mechanical properties of forgings are better than those of castings.

2. The forgings strength is higher and the fatigue resistance is stronger.

3. The forgings has better compactness.

4. There are no internal defects and surface defects.

5. Fast production speed, high efficiency, suitable for mass production of products.

6. The product quality is stable.