Heavy Industry Steel Sand Casting Parts

The full production cycle allows for the production of finished Heavy Industry Steel Sand Casting Parts, starting with the development of casting techniques, obtaining suitable castings, their processing, heat treatment and subsequent assembly. This allows you to eliminate all possible casting defects only during the design phase after the casting production run, guaranteeing that the casting fit is free of any defects, including hiding, within a short period of time; The time to respond to a request starts from one business day. The factory has its own certified laboratory. The control parameters of castings include chemical composition, yield strength, tensile strength and impact strength. In addition, research protocols including ultrasonography are available upon request.

Product Parameter (Specification)

Maple’s Service for Mining Industry

With our diversified one-stop manufacturing capabilities, Maple machinery offers castings in a wide range of categories to customers in a growing number of industries. Heavy Industry Steel Sand Casting Parts is our experienced manufacturing products to meet today's market demand for product diversification and upgrading, to reduce costs for customers to provide efficient transportation. We can customize a variety of products for customers to meet their needs and requirements, saving the time and cost of constantly looking for different processing suppliers..

Supporting Service for Mining Components

◉ As mentioned above, in order to work in adverse conditions, the performance of the Heavy Industry Steel Sand Casting Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.

◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment

◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.

◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…

◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.

Common Material for Mining Industry

We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Heavy Industry Steel Sand Casting Parts:

Carbon Steel：1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…

Alloy Steel：4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…

Stainless steel：304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…

Gray Iron：GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…

Ductile Iron：GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…

High Chromium cast iron：15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…

Aluminum：AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…

High Manganese steel: X120Mn12, Mn12, Mn13…

The Parts We Supplying for The Mining Industry

We have manufactured a wide range of Heavy Industry Steel Sand Casting Parts The following are typical products:Wire rope grip, Door handle, beam clamp for construction, spider bracket, Car parts, Sockets, Roller lever, Bushing, Pallet, Crusher components, Hammer, Bucket teeth, Sleeves, Impeller, Gear cases, Chain Links, Adapters, Shackle.

Why Sand Casting

Sand casting is an ancient casting process where the metal parts are molded by pouring metal into a hollow cavity. The mold-based manufacturing process is used to make castings with materials of iron, steel, and Aluminum. Casting-based manufacturing includes several steps and can create a wide range of shapes and sizes for metal products. The process begins with the making of a mold pattern and a gate system with the exact size and shape of the required part. The temperature required depends on the metal as some metals take a long time to heat and melt.

Maple Machinery has continuously upgraded its Sand-casting equipment and refined the casting process. The aim behind this is to use only the advanced casting technology for its Sand-casting operations. Each step follows the customer’s drawings and instructions to deliver precise solutions.