Sand casting is one of the most commonly used techniques according to the quantity required. It is usually used in gray or modular cast iron, but also in aluminum, steel, and stainless steel. About making Agricultural Machinery
Agricultural Machinery Steel Sand Casting Parts through sand casting this ensures long service life low cost long service life.
Product Parameter (Specification)
Item |
Agricultural Machinery Iron Sand Casting Parts |
Roughness |
Ra 1.6 |
Tolerance |
±0.01mm |
Material |
Casting Steel/Casting Iron |
Certification |
ISO 9001:2015 |
Weight |
0.01-5000KG |
Machining |
CNC |
Heat Treatment |
Quenching & Tempering |
Inspection |
MT/UT/X-Ray |
Lead Time |
30 Days |
Package |
Plywood Case |
Method |
Sand Casting |
Capacity |
50000 Pcs / Month |
Origin |
Ningbo, China |
Maple’s Services for Agricultural Machinery
Our Sand foundry uses CNC manufactured metal molds to create the Agricultural Machinery Steel Sand Casting Parts we need. For low cost parts made of ferrous metals, such as steel and stainless steel, we prefer to use sand casting. Alternatively, for parts made of non-ferrous metals, such as aluminum, we use die casting. We can also cast special alloys and copper. Both sand molding and die casting produce a good overall surface finish.
Supporting Service for Agricultural Machinery parts
◉ As mentioned above, in order to work in adverse conditions, the performance of the Agricultural Machinery Iron Sand Casting Parts must be excellent. Therefore, it’s not enough to only produce raw castings or forgings, but also need heat treatment, machining, surface treatment, NDT testing, etc.
◉ Heat treatment: heat treatment is the critical step to improve the mechanical properties of the workpiece. We can formulate the process according to the strength requirements of the parts, and improve the mechanical properties of the parts such as hardness, yield strength, tensile strength and elongation by heat treatment
◉ Machining: we have our own machine shop, and can complete almost all machining requirements with advanced equipment.
◉ Surface treatment: the purpose of surface treatment is to make parts work in adverse environment. Zinc plating can prevent parts from rusting; Nickel plating can enhance the wear resistance and corrosion resistance of parts; Phosphating can prevent parts from corrosion…
◉ Non-destructive testing (NDT): NDT is the last and most important step. Maple will NDT the parts to ensure that there are no surface defects (such as cracks, sand holes, blow holes) and no internal defects (shrinkage and slag) on the delivered parts.
Common Material for Agricultural Machinery
We have the ability to manufacture all steel standard materials as well as special materials. The following are our common materials for manufacturing Agricultural Machinery Iron Sand Casting Parts:
Carbon Steel:1015, 1020, 1035, 1045, 20Mn, 25Mn, A570.GrA, SJ355, C45…
Alloy Steel:4130, 4135, 4140, 4340, 8620, 8640, 20CrMo, 42CrMo4, 34CrNiMo6, 25CrMo…
Stainless steel:304, 304L, 316, 316L, 410, 416, CF8, CF8M, PH17-4, CK20…
Gray Iron:GG-15, GG-20, GG-25, Class 20B, Class 25B, Class 30B, GJL-250, GJL-300…
Ductile Iron:GGG-40, GGG-50, 60-40-18, 65-45-12, 70-50-05, 80-55-06 QT500-7, QT400-18, QT700-2…
High Chromium cast iron:15%Cr-Mo-HC, 20%Cr-Mo-LC, 25%Cr…
Aluminum:AlSi7Mg, AlSi12, AlSi10Mg, A356, A360…
High Manganese steel: X120Mn12, Mn12, Mn13…
The Parts We Supplying for the Agricultural Machinery
We have manufactured a wide range of Agricultural Machinery Iron Sand Casting Parts. The following are typical products:Brackets, Rototiller tines, Tillage Points, Seed Drills, Chain Sprocket Locust Harrows, Levers, Plough, Pivots, Covers, Clevises, Handles and Latches, Suitcase Weights, Pumps & Valves, and Hardware.
Why Sand Casting
Sand casting is an ancient casting process where the metal parts are molded by pouring metal into a hollow cavity. The mold-based manufacturing process is used to make castings with materials of iron, steel, and Aluminum. Casting-based manufacturing includes several steps and can create a wide range of shapes and sizes for metal products. The process begins with the making of a mold pattern and a gate system with the exact size and shape of the required part. The temperature required depends on the metal as some metals take a long time to heat and melt.
Maple Machinery has continuously upgraded its Sand-casting equipment and refined the casting process. The aim behind this is to use only the advanced casting technology for its Sand-casting operations. Each step follows the customer’s drawings and instructions to deliver precise solutions.